December 9, 2022 2 is the Magic Number- What Shot Size Should You be Using for Waterfowl Hunting By: Justin Hunold Empty hulls signifying a successful venture onto the back water. A 12 gauge 3″ #2 will handle this sort of work marvelously. Let’s start by saying there is no one size fits all situations in waterfowl hunting. A lot of “Gospel Truths” to some folks maybe hocus pocus to others. “I only need half a dozen Mallard Decoys and a Jerk rig.” – Not on the coasts of North and South Carolina. “ Canada’s are dumb over water.”- Not if you shot em up where they roost over the same water. “ You gotta have spinners out to add visibility.” – Not if you’re way down South and those birds have been shot at over Spinners for a few thousand miles. I’m going to stick my neck out here and give you a truth that I and a few of my friends cling to, if a hunter shows up with a 12 gauge loaded with 3” #2’s in anywhere from 1 ⅛ to 1 ½ Oz of steel shot they can handle just about any waterfowl situation they might get thrown into. We are focusing on steel shot and not other non toxics like Bismuth or Tungsten. This will be a matter of KISS or Keep it Simple Stupid. Because let’s face it we all get out smarted by birds so the stupid part applies and keeping it simple makes you a more efficient killer. When Not To Use #2 Let’s look at some reasons you might not want to be shooting #2. If there is one argument against #2 in all situations, everything is a nail if all you have is a hammer argument…kinda. Shot size and choke constriction work together and can be very situational. So, it stands to reason that although a #2 might be great at a lot, it’s not optimum for some applications. Early Season Teal, Gadwal and Woodies might be very common in your area. In fact a lot of places have a “Teal Season”. This is a place where a #2 can work but shouldn’t be the first choice. These ducks are small, fast and maneuverable. Most hunters will opt for a #3 or #4 in Steel for this sort of hunt. Likely this will get paired up with a bit more open a choke as well. In areas of extremes either especially big or small birds a #2 sits in the middle of the bell curve. There may be better choices but it will certainly work. Most of the time when taking on the little ducks we will be expecting them in close with shots over decoys. With this in mind small ducks in close calls for smaller shot with good pattern density. The little guys aren’t as hearty as say a diver and a hunter will be better suited with less holes in their pattern. This isn’t to say a #2 won’t work, it just isn’t the best option. The other extreme is late season geese. I’ve hunted Canada’s coming off the Finger Lakes that had what seemed like inches of fat on them. When it came to those birds we were starting our shot size choices at BB and going up from there. These are big tough birds that have plenty of cushion for the pushin so to speak. This is a time you’d find a lot of us running full charge 3.5” shells stuffed full of BB or BBB. We killed a lot of birds with those loads, but looking back a 3” #2 probably would have done fine at the distances and circumstances we were putting birds down at. When to use #2 Firstly, if I was limited to one steel shot size for all waterfowl hunting situations it would be a #2. This shot size is about as big as you can go without hampering ballistic performance, it holds reasonable pattern density, and carries enough kinetic energy for most waterfowl work. So, it’s a great choice for a lot of hunters who might be in crossover seasons with ducks and geese, or situations like I was in last Saturday where I was as likely to get a shot at a Blue Bill or Bufflehead as I was a Mallard or Black Duck. Big Puddle Ducks are what most waterfowlers chase. Mallards, Blacks, Widgeons, Shovelers, and Pintails will all be reliably taken with a 3” #2. I know a lot of folks like a #3 for this sorta work but let’s face it the ducks don’t know the difference and #2 are easily found at Walmart if need be. Normally, when I head out to some backwater and I am expecting to encounter the likes of any of these birds my Retay will be stoked with 3” 1 ⅛ #2 of some brand or another. I’m confident that I am not leaving anything to chance with that shell selection. Divers, you might love em, you might hate em but man are they fun. So, here’s a confession, TJ Rademacher and I have been hunting partners for a long time. And have been Long Line hunting partners. We chased Divers when every other person in the piedmont of NC was out looking for Green Heads. We would be out setting twelve dozen decoys, that’s 144 for you mathematicians out there. After all that work we would wait for some ducks with little wings and big feet to come circling in and try to land in our lines. We generally did that with 3” #2’s ready and willing. We killed a few Diving Ducks back then, and I have no reason to shoot anything other than #2’s at them. They are tough and we were the school of shooting until they stopped moving. Shot size matters in the world of tough ducks built to disappear so, this is where the majority of my thought on the best shot size for duck hunting came from. I never met a puddle duck that was half as tough as a buff even if they were normally twice the size. Number 2’s were my go to. In most of the places I inhabit there is a September Goose Season for Resident Canadas. When those 30 days roll around you can bet your bottom dollar that my gun has #2’s in it. In one of my previous articles I talked about a hunt where TJ and I crushed some local Canada’s on an island. We were shooting #2’s. In that same article I talk about my stupid head flairing geese , well we killed our 4 man limit that day and we were shooting #2’s. In all my Goose hunting experience I believe that a majority of birds were taken with a #2 and I see no reason to change. For more about that check out this article about shot size for geese. Stoking a couple Retay’s with your favorite 3″ # 2 steel shot is a near perfect combination. In the famous words of Austin Powers “Who does number two work for?” The simple answer is everyone. This shotshell combination isn’t the end all be all. It’s not the best for all situations but there are few other options for a shot size that can realistically take on most waterfowl situations. If you’re going out with a guide or experienced friend and they tell you to grab something else for a specific situation, take note, grab a box and pattern it and then run it if it makes sense. But I would advise grabbing a few different boxes of 3” #2’s and patterning them all. See which shoots the best and then buy as many as you think you’ll need for the season and then add some. None of us are as good a shot as we believe ourselves to be and no matter what situation you end up in during the waterfowl season you can’t go wrong with the best shooting 3” #2 you can find. This stuff just works.
September 16, 2022 Advanced Beginner: What are Some Semi Advanced Needs and Techniques in Duck Hunting? By: Justin Hunold A bit ago we talked about What You Need to Start Duck Hunting. We took you from baseline non hunter to a minimally outfitted duck hunter, now we want to look beyond this. You may have bagged your first bird, a few different species of ducks and geese ,or even have a band hanging from your lanyard. With that, what do you need to “Step Up Your Game” when it comes to stacking ducks up? Let’s take a look at some gear and ideas that are just beyond the beginner phase. Decoys- So, you hunted over a minimal spread of a dozen hot buy mallards. You’ve had some ducks light into them and you were thinking about that image as you plucked them later, but how many ignored the spread? We all like to say you can kill ducks without decoys, lot’s of ducks die over a dozen decoys, and things like that. There are times when bigger truly is better and you would have killed those same birds over three dozen decoys, and maybe gotten a crack at the ones that zoomed past you, not given your lonely dozen a second look. A good secondary investment in the realm of decoys is a second and even third dozen. I prefer to set up around two dozen given the time, space and my own capacity. Having thirty plus decoys will happen at some point, it’s not a bad place to start “Buying In”. Spinning wing decoys are very commonplace at this point, but there was a time when they were so deadly that game agencies debated banning them. I would make an argument that as opposed to that third dozen decoys this might be a better investment for your hunting funds. Lot’s of ducks still come in cupped to land next to that spinner every year and adding a bit of motion to the spread might be a better tactic visually than just adding more still decoys. I also would argue to get a Hen Spinner. It can be used anywhere, at any time of year. Moreover some companies make smaller, less expensive versions of their flagship model decoys. Normally you can have two of the smaller versions for the price of one of the big dogs. That’s a smart buy. Speaking of motion, let’s talk about a jerk rig. Simply put, a jerk rig is a decoy or decoys attached to a string that is anchored on one end, has some elasticity, and is pulled on by the hunter at the other end. There are factory models, and a bunch of ways to DIY this rig, at the end of the day jerk rigs probably fool more birds than spinners and in some situations calling. This is a great way to add motion to the ocean and keep pennies in the piggy bank. Calls- Hopefully at this point you’ve been practicing and have graduated past a drake whistle, you’re confident that you sound reasonably like a duck. Now, before you go and buy a competition grade call, or even a high grade, high rent acrylic call, maybe look into a few different models of poly and wood calls first. With different call styles come different sounds, nasally, raspy, high pitched, low, whiny and everyone has their own flavor they like. Are you sure the one you bought is the best call for you to marry? I would advise doing some dating first. You can do that by buying a few different styles of calls in the less expensive materials. I would look at getting both a reasonable double reed and single reed call. You will likely find the double easier to blow with a bit sweeter a sound. The single has some legs and can carry a long distance. You might decide to use one or the other exclusively. There are a lot of folks who love the ducky sound of a double and hunt tight, never needing the volume of a single reed. Then there are people who hunt bigger water and want to reach out and touch those birds, and make a compromise to call softer when the birds get in close, a single might be their only call. I advise having both and using the right tool for the job. Once you find a style of each you may decide to purchase the high rent model in both, or neither. Calls do not have to be expensive to work. Experiment a bit with that same money and you will likely find a few you like rather than one you thought you might like. Comfort- While in your first few hunts you probably didn’t realize that there are only a few conditions a hunter lives in you’ve figured it out by now. You’re either boiling hot or freezing cold and apparently always wet. Comfort is a huge factor in hunting. The longer you can tough out a situation the more chances you get. Here are a few things I use to help me not just tough out conditions but thrive in them. Merino Wool base layers, taken from old school hunters and modernized by the western big game crew these base layers are now an across the board staple. As soft as cotton, merino wool retains its ability to insulate when wet. Plus wool repels stink, which can be a blessing when stuffed in under waders. I use wool when waterfowl hunting, big game hunting and general everyday outdoor use like camping and tailgating. A Battery Powered Heated Vest is the perfect thing to take that mid morning chill off. I have been using one for a few years now and you won’t find me without it if it’s below 45 degrees. Secondarily, the batteries can be used to charge phones, cameras, flashlights and a pile of other electronics in the field. I don’t start out the day with mine turned on but after that chill sets in from the sweat I worked up putting decoys out I crank that vest up full blast. It’s a game changer. Calling in gloves sucks, shooting gloves also sucks, having wet soggy gloves sucks the worst. A good quality hand muff is the solution to all of those problems. I have gone to fingerless gloves and a muff for most outdoor adventures and this holds true for waterfowl hunting as well. These aren’t the ones you see an NFL skill player wearing, today’s muffs come rigged with Sherpa fleece inners, waterproof outers, hand warmer pockets and even loops for extra shotshells. This is a comfort item that you didn’t think about when first acquiring gear but as soon as you have one you’ll never hunt without it. I love mine and actually have multiples. Plus, they are great for throwing your phone and headlamp in for safekeeping and easy access during the hunting day. The Final Flight- Will any of these things change your luck, make you a better hunter or get you a limit of birds? Actually, Yeah. A hunter who is able to draw more birds because of some better visibility, motion and sound, who is then able to be present and attentive because they are warm and comfortable is more likely to put some birds on the stringer. You still have to do the work. You still have to be in the spot, constantly learning, scouting, showing up. You have to put the decoys out with care, hide yourself well and shoot straight, but add these items to that and guess what, you’ll probably be able to do all of those things to a bigger audience of ducks, and be ready and willing when the time comes to say “Drill Em” .
