December 30, 2022 Tools of The Trade Revolutionary Tools In Waterfowl Hunting By: Justin Hunold A bit ago we talked about the advent of percussion caps and the advancements in shotgun shells after that happened. We also looked at the point in time that we could pluck a hunter out of , put him into a modern duck blind and he’d fit right in. That seemingly happened in the 1960’s, but if he were in that blind what are some things he would see that would maybe astonish him. Tools that we look at on a daily basis as common but just a short 50-60 years ago would be revolutionary, if not altogether foreign? This is a list of innovative tools for waterfowl hunting that have taken place in the last thirty years or so, that we take for granted when chasing ducks and geese. Modern Shotgun Finishes are almost impervious to natural conditions Shotguns-Let’s start with something near and dear to our hearts here at Retay, shotguns. While the hunter from the 1960’s may have been toting a good semi automatic there was a higher probability that he was using a pump, side by side or an over under. With the advent of astoundingly reliable semi automatics like our Gordion or Masai Mara it’s becoming rarer and rarer to see anything other than a fast cycling, reliable and nimble semi in the blind. That’s not to say that a good pump like the Retay GPS XL doesn’t have a place because, it certainly does but the push in Inertia operated shotguns was nothing that the hunter of the 60’s, 70’s or 80’s could have ever predicted. In those days it was commonplace for a semi to be more of a problem than an advantage but our industry has sought to move past that. Retay is at the head of the pack with the Inertia Plus bolt design. We could go over the normally stated advancement in magnum shotguns, making 3 and 3.5 inch offerings the norm but that horse has been beaten to death. And a lot of folks are back to shooting 20 gauges for waterfowl and to great effect. So, let’s look at something that is overlooked and undervalued, shotgun finishes. When “Plastic” guns started to make appearances back in the 1980’s traditional hunters scoffed at them but the synthetic stocked guns started to impress with their ability to operate in any weather condition, and the owners lack of fear of scratching the gun. Now it’s a talking point to see a wood gun out on a hunt.With the advent of synthetic, hydro dipped guns came next. With the plastic and matte finish of the modern shotguns these guns became great testbeds for all sorts of camouflage finishes. With these coatings the guns became very weather resistant. Again, camo guns are now a normalcy. A lot of the time the guns will have aggressive texturing and molded sling attachments as well. These camo finishes are great for ease of maintenance. Wipe em down with a Dude Wipe and some oil on the moving parts and you’re good to go, but there is one more that is now the gold standard. Cerakote is a baked-on hard finish that bonds to the metal of the gun. Now your gun can be whatever color you choose, and be basically impervious to all weather conditions. My own Masai Mara is the Grey Light version, I don’t worry about any weather conditions. I’ve dunked it and put it right in the case for travel without a second thought. The 1960’s hunter had absolutely no option to do that with his blued and wood gun. Again, all we have to do is make sure the internals are cleaned out when we get home after a hunt in a salt marsh or freezing rain and that Cerakote gun will be good to go the next time we call it up to bat. When spinning wing decoys work nothing works better Spinning Wing Decoys -Spinning wing decoys were REVOLUTIONARY when they hit the market in the late 90’s and hunter’s have more versions to choose from now than ever. They are so good at drawing ducks they aren’t legal everywhere. Think about that for a second. Now imagine that hunter from the 1960’s seeing a spinner for the first time. Imagine when you turn it on with a remote, and then kill it when that first swirl of birds locks up, ready to light into the spread, what is that 1960’s dude thinking? In a time when people are searching out hand carved decoys and vintage decoys to use in their spreads our retro hunter would be totally at home, but if there was ever a magic bullet when it comes to decoying birds it is likely a spinner or maybe some other form of battery powered motion. This has become a double edged sword though, currently we often opt out of spinners for a more subtle motion in the decoys. But make no mistake they still work and the old timer would try to fit that thing in his Delorean to get it back to his mid century spread. Lighting makes us more successful and safer when working predawn LED Lighting-Then God said, “Let there be light”; and there was light. Modern hunters aren’t the almighty but there are plenty of times our modern lighting options are a miracle in comparison to even twenty years ago. We light up the predawn as if we were running and gunning in broad daylight and we are better for it. Whether it’s a simple headlamp with multiple color lights or LED Deck, or LED Light Bars and spots these things are awesome. I remember when a Mag Light was the goto, or if you were a cool guy you might have one of those military style angle head D cell flashlights. Now, you’d never think about taking anything other than a headlamp out for personal use. We underestimate how much more successful and safer we are because of these lights. We are able to be more precise in all of our set ups with our personal headlamps. We are able to get in with long walks or paddles because of the little gems and light up some back water in a way that would have taken a car battery and a spot light just a short time ago. We are safer in those pre dawn races to the “Spot” because of the relatively inexpensive investment in on board lighting for our boats. And from there we are able to see where we are going and what we are doing. The deck lighting is not only great for general use, but let’s not forget we are out there with firearms. We are always responsible with our guns but the rules of firearms safety always apply. When we can see what’s going on with those guns we are safer. So, deck lighting adds safety in ways we might not even think about. Would these be the only things our “old timer” would notice? Absolutely not! He’d probably mention that computer phone thing you have attached to your hand, face paint, camo, waders, and a million other observations, but these things are worth mentioning first. They are often overlooked in different ways. We will probably dive into some of the others in upcoming articles. So next time you turn your lights on, put you spinner out and load your Retay before the first flight of the morning, just nod your head to how good we have it. And don’t forget to occasionally lose yourself in this thought experiment -Would you be out there if you didn’t have it so good? Would you do it the way that hunter from the 1960’s did if you had to? Do you love it like that?
November 25, 2022 Doing God’s Work: The Roots of Modern Waterfowl Hunting By: Justin Hunold Imagine you’re dead set on a day of jump shooting mallards on some local ponds or tanks. You took your time to sneak to the edge. You didn’t skyline yourself sliding up to the shooting position. All of your effort is going to feed your family, meat being a scarce commodity. You see the greenheads swimming there, you’re already thinking of plucking them. Then as you pull the trigger your powder frisen( pan) flames and smokes and those once still birds are gone in a flash…pun intended. Back to bread and lard for dinner. This was the problem the entire firearm world faced from the very earliest guns. Whether it was matchlock, wheellock or flintlock there was a telltale flash and smoke. A warning to every single shot. In modern times we are worried about fast and reliable follow up shots, like using Inertia Plus systems on Retay USA shotguns. There was a bit of parallel thinking to solve this problem and history will tell us that god loves hunters more. The first patent for a percussion system was issued in 1807 was given to a Scottish Hunter, who was trying to solve the very problem mentioned above, spooking birds. This invention was the brainchild of Reverend Alexander John Forsyth. Was it divine intervention? It can’t be a coincidence that the first reliable fulminate ignition system was brought to market by a reverend. Just proof that as people change with the advent of technology Nimrod still has a place as a mighty hunter. After this initial patent was defended by the good Reverend from 1807-1821 the percussion systems that followed exploded on the scene….pun still intended. And as always most of these advances were spurred by combat. Percussion firearms with paper and later brass cartridges were commonplace by The American Civil War. Variants of caps, primers and pin fire cases spurred technological advancements in the way of firearm ignition at a staggering pace. Some systems would last less than a decade. Some would evolve. When it came to self contained shotgun shells brass became the preeminent way to stoke the barrel. Between side by side shotguns and brass cases there was a relatively fast and reliable waterfowl combination. By the late 1800’s Winchester was loading brass shells for consumers and they maintained heavy use into the turn of the twentieth century. By the time the years started with 19 there became a debate in the world of shotguns whether it was better to have multi use brass shells or single use mass produced paper hulls. For a lot of applications those paper hulls won out. Save one. Waterfowl hunting. With paper being very not moisture resistant let alone waterproof. Brass shells would continue to be used until waxed and lacquered paper hulls finally won out. With the advent of the more modern shotgun actions, pump and semi automatics, and the “weather proof” mass produced paper hulls we can see the beginnings of what our modern waterfowl hunting roots look like. By this time the modern ideas of conservation were starting to take root, and more modern materials were allowing for more comfortable hunting all around. The wader was popularized around the beginning of World War I and rubber was perfected for the most part around World War II. With fast repeating shotguns, rubber waders and mostly weatherproof shells a hunter from the 1950’s likely wouldn’t look out of place in a blind today. The final invention in that combination that would really bring this hunter into the contemporary era of hunting would be the advent of plastic hulls by the Big Green in 1960. This is where the truly waterproof shotgun shell met the truly waterproof hunter. Synthetic petroleum based plastics and rubber brought mass produced technical gear to the masses. Remember back to that bank, jump shooting greenheads. Shotguns powered by flint and loose primer powder. One man, a Reverend, with a bit of divine inspiration, decided to bring waterfowl hunting into modernity. Without his loathing of the flash in the pan who knows where we would be today? He worked to build a reliable mechanism to hunt fowl with, and we continue with that tradition to try to bring you the best possible experience chasing game. Thanks for coming along with us and let’s tip our hat to Reverend Forsyth who’s forethought spurred us to get here. You’re Nimrod and we continue to do God’s work.
August 5, 2022 A Waterfowlers Preseason Checklist By T.J. Rademacher We are now basically a month out from being able to get after them again fellas. In my home state of North Carolina, we are allowed to start hunting resident geese on September 1st. It’s a great way to shake off the dust and get back after it. The key to having the best possible experience in any waterfowl hunting scenario is being prepared for as much as you can be. It’s like laying down a really good paint job. The key to success is all in the prep work. Here are some things you probably should have already done if you are a month away from getting back into the grind. If you are a field hunter, you should already know where the hot fields are going to be. Local farmers rotate crops yearly, so you should be riding around looking for fields that will probably hold birds when it’s time to start cutting. This is a good strategy for both geese and ducks. If you have been in an area for a while you will have picked up on roosts and heavily trafficked fields in these areas. These are high percentage options for good hunts throughout the season. I Try to do this early. If I can catch a farmer out without totally holding him up from something important I’ll try to introduce myself or if we know each other make sure to get permission on his land again. If you’ve treated his land with respect in the past you will likely have your spot held for this season. If you hunt over water or moist soil units both public and private, you should already have been out looking for the places where the food is going to be. You should be knowledgeable on what ducks actually eat naturally in wetland areas or areas that flood seasonally. So, when you break into a clearing and find it choked with smart weed you can put a mark on your GPS. This is going to be a place to be looking at when the birds get here. Again, you should already have permission knocked out on private land. If you haven’t done this, you are behind and you need to go and do this to salvage what’s left. Being proactive rather than reactive is key so you can broaden your options this season. If you hunt out of established blind sites you should have already made sure they’re still there and if they are in hunt-able condition. Go ahead and remove overgrowth to create holes for birds to land in. You’ll be way ahead of the game when it’s time to be in there enjoying your time afield. Also clear this with a landowner to make sure it’s okay. Verify that this is legal on the piece of public land you are planning to hunt. Do not just assume if your name is not on the deed. You should be scouting boat lanes and channels to make sure there isn’t going to be something that blocks your access. Again be prepared. You should be washing decoys now if you didn’t do this before you put them up last season. Go through every one of them and make sure they are clean and any small repairs are made before they need to be in the water. All of the weights, stakes and other required items for functioning decoys should be inspected and any necessary repairs on rigging need to be made now. You should not be running to Walmart for stuff at 10:00 pm when you need to be up at 3:30 the next morning. Check batteries on your motion decoys because the lithium ion batteries may not hold a charge if you do not periodically charge them during the off season. Believe me I learned this the hard way. There is still enough time to get new ones and install them. Check your remotes on the spinners and ensure they function properly. Everything should be bagged and read to go. I label bags so all I have to do is grab and load things as I need them. It saves time and frustration when it’s late and you are trying to get ready for the next day’s hunt. Your outboard or surface drive should have been running all summer while you were catching fish but if it has sat around for a while make sure the plugs are new and the carbs are cleaned and ready to go. You don’t want to be rebuilding carbs the night before a hunt or waiting on parts when the birds get her and it is time to be on the water. You should already have a few spare parts for items that routinely need to be replaced. I’ve learned this the hard way as my current outboard has aged. You should be constantly inspecting and doing proper maintenance on your motors, boats, ATV/UTVs, and hunting wagons because they’ll take care of you if you look after them. Stop using ethanol gas in small engines, it’s not worth it even if you’re a college kid one budget. It destroys fuel lines and will clog jets on carburetors. Your blind bag should have that 5-month old granola bar stash cleaned out and restocked. You should already have a Ziploc bag of toilet paper ready to go. For further information, refer to my article about blind bags earlier this year. It will get you squared away in a hurry. Layouts and frames should be prepped and function checked. Get that first layer on the blinds so all you have to do is blend them the morning before. Your hedge trimmer should be ready to go for grassing blinds now and all your brush cutting items should be located and in your truck box so you aren’t digging though the bottom of a trailer for them when it’s time to use them. Check your gear. Make sure it’s still in good shape. If you have a pair of waders make sure you function test them before opening day so you can repair them or get a new pair. Make sure you have some wader patch kits available. If you can afford it, have a backup pair if waders. This is one of the best things I’ve ever done for myself. It’s a huge save when you find that briar patch or forgot about that barbed wire fence. Long story short you should have never stopped working on stuff after the season ended. If you are under the gun it’s time to prioritize and get stuff taken care of so you aren’t chasing your tail for the next month. The off season is just another season for you to be keeping the excitement alive. Also you should have been shooting your shotgun during the summer so you are ready to take advantage of your opportunities when they present themselves. Don’t be shaking the dust off with that first group of birds. It’s time to get after it boys and girls. Here’s to another successful season!
June 24, 2022 Hunting Buddies: What Makes a Good Hunting Partnership By: Justin Hunold Aside from my father I would say I have had two real hunting partners in my life. One is family and the other mine as well be. I have two really great fishing buddies as well. Furthermore, I have a cousin who is also very busy with all things in life. We don’t hunt together often but we also talk and text about it constantly. If the opportunity presented itself I believe that they would be good hunting partners too. What has set them apart from the dozens of other people I have spent hours with out in the woods and on the water? Well, other than their ability to put up with my bullshit that is? Let’s dive in and try to figure out what makes us tied at the hip for outdoor adventures. I asked them all the same questions via text message and prompted them to be brutally honest about their answers. I wanted to see if we could drill down on some common themes to bring out what has made us good partners in our adventures. What makes me compliment them in the pursuit of the natural world. The question is based on this “Why are we good hunting partners?” The Good: The question was “What is the best part of having me as a hunting/fishing partner.” If I were to look at the cumulative answers it comes down to shared values. I think this is probably the most important statement in a good partnership. I don’t necessarily mean religion, political or fiscal values either, although those may help. Family values fall into this category, if you prioritize family, like I do, your hunting partners need to understand that. I don’t care what’s happening, I will not miss Halloween or my son’s Birthday. Both of which fall during hunting seasons. My buddies need to understand and be okay with this. We may have to drive separately or hunt/fish alone one or two days during those stretches, but those are boundaries I put in place and with that they can do the same. Brad is my cousin, I hunt with him the most. He has a wife and a step son. We have cut trips short or rearranged weekends for baseball and ultra marathons. Craig and I have been friends for 20 years. I was in his wedding and I am his daughter’s godfather. We both understand the priorities of parenthood and take the fact that we ran around the woods and water at will together for 10 plus years into account. Now we do it when our schedules line up. Work ethic is another aspect in the spectrum of values that was noted. Jim, who I have spent more time on a boat with than probably everyone else combined, stated that the competitive nature of our fishing was a draw and bonding opportunity. We fish in very different styles so we were always grinding to catch more or bigger fish, there was always one more cast. Tom, is another cousin. We don’t get to hunt together a lot, he is a family man with a wife and three kids and a MLB player. We talk about hunting on almost a daily basis. He pointed out that we have the same level of work and effort. Brad said we are willing to do anything and go anywhere to get the job done, without complaints. Your hunting partner needs to love the process as much as you do. Your levels of input and output need to be nearly equal. Craig also brought up valuing conservation of the resources including responsible harvest of fish. Brad focused on the fact that I enjoy the entire process of hunting, scouting, setting stands, building blinds, cameras, content and that we share the year round mentality. Your values don’t have to be the exact same as your hunting partners, and if you have multiple hunting and fishing buddies they don’t have to have the same values either, but yours need to complement each of them. Jim doesn’t keep a whole lot of fish, Craig does, I keep this in mind with each of them. TJ will get up at 2 am if that’s what is needed to catch the first flock of the morning, Brad on the other hand will hunt his way in during gray light to best take advantage of his level of patience and will change tactics at the drop of a hat. TJ and I stick to a plan, with Brad I am very fluid with planning. You’re there as much for them as they are for you. And that’s for the bad too. The Bad: “ What’s the worst aspect of hunting/fishing with me?” I asked each of these men to be brutally honest with me. That’s a lot to do with someone you need to trust with flying hooks, bad weather, treestand, fast and deep water and firearms. There have been moments with each of them that I was ready to leave them out there and I know for sure they have more times than that when they were ready to tell me to pound sand and we are done doing this together. Here are the examples that came to light that I may not have seen coming. Competition, Jim and I are competitive with fishing and we have viewed it as a good thing most times. Yet, deep down in my dear friend’s soul lived a beast that wanted to toss my over competitive ass into a deep hole with an anchor tied to my leg because of that same competition. At least that’s the way I read his text answer. He mentioned something I do all the time that I had no idea bothered him. I slap my lures off the top of the water to clear weeds. I do it maybe dozens of times on a given fishing trip. He hates it. I understand why that’s annoying and I totally won’t ever do it again when we are together, unless he is out fishing me. One of the things Brad mentioned was along the same lines, the good was we feed off of each other. The bad aspect was the same, we feed off each other. So, instead of one helping the other push through the tough days or mornings of laziness we join in commiserating or skipping time in the stand we should be partaking in. So, we have always known that but now that it has been verbalized I will do my best to push when it is on me to do, but I will ask him to do the same. It’s a partnership after all. TJ pointed out the fact there were plenty of early days that we didn’t like each other until the decoys were set and we were watching for incoming birds. We both learned you didn’t have to want to like someone to work as a team. This occurred with some of those very early, very cold and very quiet long line sets. We hunted enough together we didn’t really need to speak to lay out twelve dozen decoys on long lines in the pitch black. We were well oiled even if we were giving each other the silent treatment. The Ugly: With TJ, Jim, Craig, and Tom they all gave an answer that I take as the biggest compliment. It’s the ugly truth of growing older. The worst part is we don’t get to do this stuff together enough. That was their “worst part” and I agree. I spend weeks a year hunting, scouting and camping with Brad but trying to line that up with the others is almost impossible. So at the end of the day, we do our best and know we always have the outdoors. Friendship, this is the highest priority. For my family and friends that I hunt and fish with, we value that bond more than anything else. We level at the same place, fish, bucks and ducks are great, but time spent together is the driving factor in all of this. Whether its skipping morning sits to grab coffee and drive around glassing fields, grabbing Bojangles after a duck-less morning, beers and rigging rods only to get skunked on the first salmon trip of the fall, sharing baby pictures and trading one liners from the Simpsons or texts of trail camera videos, pictures and talking about heavy metal therein lies the point. I value them, and I think I can say with confidence they value me enough that success is a great goal but it truly is the journey that matters. And when success happens I am happy to have such great men in my life to share that great feeling with. I know they have my back and I have theirs. I believe this is the essence of the pursuit of game, a story as old as time. These bonds are forged in the first embers of the human spirit and continue to burn no matter how much time they are left to the side of life. A cupped bird, a chasing buck, a spawning salmon, dropping acorns or hard hitting smallmouth is all the spark we need to continue to burn that fire. A hunting party is as ingrained as procreation or communication. It’s what makes us human, and if you find the right hunting and fishing partners, they can help make you a better human.
June 17, 2022 Guided Hunts and Being a Good Client By: TJ Rademacher I’ve had the opportunity to be on both sides of the client-outfitter relationship. I came out of high school and spent a short time as a big game guide in Montana and Idaho. I got to experience the ups and downs of being in the outfitting business. Since it is a service there is a high amount of pressure to get your client into position for the best opportunity you can. Typically, there are fairly large sums of money changing hands. With that exchange come expectations from the client. This is perfectly acceptable. You should expect the highest amount of effort possible to be put forth by your guide and the outfit to help you get the opportunity for a successful hunt. The key word in that statement is opportunity. The critters you pay good money to chase are not in on this exchange of money. I don’t care if it’s a laid-back South Texas Teal hunt or grueling pursuit of a big western bull elk, critters do what critters do and they have one thing on their mind. That is survival. They are working for one more day and trying to not get themselves killed. They do not care about what you want. Where they were yesterday, they may not be there today. It’s still hunting at the end of the day. It’s best to remember this when you pay an outfitter for their services. You should not be a push over if you think you are genuinely taken advantage of to be sure but managing your expectations and not letting yourself think that your money alone will buy your success is what I’m driving at. Here are a few things that will help you choose outfitter and end up being more successful. Hopefully, it lends some light on how to be someone that an outfitter looks forward to having back too. This lays out the thought process on how to be successful on a guided hunt. At the beginning of most hunts there is usually some sort of safety talk from the outfitter or guide. This is a general layout of the expectations, what is acceptable behavior around firearms and other key subjects for the area you are in. I’ve seen and heard about some wild stuff going down. Pay attention to what is expected. You don’t want your guide on edge wondering if they are going to catch a Nosler partition through their ribs because of a client constantly fiddling with safeties and being generally unsafe with a weapon. Follow the rules don’t cut corners and practice the rules of firearms safety. Most guides are the same as you. They love the outdoors, and they love getting after it and being successful in the field. Most take a huge amount of pride in being the one to count on and help deliver that success. They stay under a constant amount of scrutiny from clients themselves and the managers of the outfit. They want you to be successful because they want to be a successful guide. Be gracious from the start. The amount of logistics and prep to get you where you need to be are huge. In many ways the logistics are what ends up making you successful. Stay humble and treat it like you are a team. It’s okay to ask why you are doing what you are doing sometimes. It shows you are genuinely interested and will typically be appreciated if it comes from that angle. The thing I would tell you to avoid is being the person openly questioning somebody who has likely forgotten more hours in the area you are hunting than you have put in probably anywhere. This is not a good way to form a successful team and may hinder your success greatly. Check your ego at the door and be in the moment there with your guide. They will appreciate your attitude. Come prepared. When you are researching an outfit to hunt with, you’ll typically see a packing list of some sort. Pay attention to this and either pack or purchase the items you think you’ll need accordingly. If you must purchase something like boots make sure you are wearing them months or at the very least, weeks in advance of your hunt if you are planning on a western big game hunt. I’ve seen new boots smoke clients within a couple days. Don’t do that to yourself. Along with breaking in your boots or other gear you need to be physically up to the challenge. Don’t be the guy who so horribly misjudged the physical requirements of a hunt that they can’t take advantage of the guides experience due to lack of ability to get to the places they need you to go. This is your responsibility to make sure you have the endurance to do this in advance. It’s hard from the guides perspective to feel a ton of sympathy when you don’t plan ahead. Actively participate in the hunt from start to end. It is about the experience and your guide can see that. You will always get more from someone when you try and match their efforts or assist them in some way. Don’t be the guy who doesn’t help brush and A-frame or at least offer to set out/ pick up decoys. It’s a small gesture that will help earn mutual respect between both parties and in some cases influence your success. This Is especially true when you are setting up 60-70 dozen silhouettes on a Kansas field hunt where the farmer won’t allow trucks and trailers in the field. It’s all part of it and you need to help roll with the punches to be successful. Tip. Even if you are not as successful as you had figured. the effort to get you on the best opportunity possible was most likely put forth if you went with a reputable outfitter. Your choice in outfitter is your responsibility. You should seek out a group of people who are honest and hard working. They typically have been in business for a while and have a good track record of keeping their clients happy for the most part. Don’t try to cut corners and go with someone who doesn’t exhibit most of these qualities. Especially the honesty and work ethics part. Your tip is your sign of appreciation to the individual that helped you have the best experience available at that time. You should recognize their efforts by tipping accordingly if they have done their job to the best of their ability. Sometimes you are unsuccessful no matter what happens due to a variety of reasons. A lot of these are beyond anyone’s control. You can have a skunk at peak rut as well as the day of a peak migration. If you’ve made it this far you’ve seen that a guided hunt is an interactive experience and comes with some simple responsibilities on your part. Accepting These will help you have the best experience you can possibly get access to at that particular point in the season. Plan ahead and book during times that have historically been the most productive for the outfitter in the past. Above all be gracious and positive. Be ready to put in the effort to get you the rest of the way to success. Also remember That this is supposed to be fun. Don’t take things so seriously that you aren’t taking something positive away from the time you are in the field. Cherish each sunrise. You aren’t guaranteed tomorrows. T
June 10, 2022 Midlife Flyway: What Do I Need to Start Waterfowl Hunting as an Adult? By; Justin Hunold When we are introduced to hunting at a young age we generally grow up with a solid idea of what we need as far as gear goes. For those of us lucky enough to get to see the sunrise over the water and through the reeds from a childhood, waiting for the whistles of the wings and the calls of overhead ducks and geese, we have a great idea of what we need to have to go duck hunting. We likely started with hand me down wares, and by adulthood have worked into our dream gear. Unlike most of the past, there is an up and coming population of hunters diving into the field that are past the hand me down stage. These hunter’s have taken on the moniker of “Adult Onset Hunters” and they can often afford to go right into their dream gear and do. But how would they know what’s for show and what’s for go. This leads people to duck duck go things, and at the end of the day one question rings true: What do I need to start waterfowl hunting? This could end up being a series because of the depth and quantity of answers possible, but we are looking at someone who has decided to pick up waterfowling for the first time and needs to start a gear drive from scratch. There are levels to every game, but we will be trying to run at about a mid to higher end level for quality, and more than likely price. Also focusing on one hunter and assuming they can walk in or have a boat, canoe or kayak. So, what does an individual NEED to try and shoot a duck or goose in their first season or so of concerted effort. Shotgun- Obviously, a shotgun and ammo are the meat and potatoes of what makes hunting different than hiking, wading, paddling or boating. I would suggest a 12 gauge repeating shotgun to start. If the shooter is uncomfortable with recoil or a larger gun a 20 gauge would be a great option, but a bit more limited. If I had to choose one choke to run for most waterfowl situations it would be modified. I like a fiber optic bead and generally a 3 inch semi auto. Black or Camo synthetic stocks fit the bill. Your gun will also need a sling of some sort. That about does it for the “Needs”. Ammunition- When hunting waterfowl you need to shoot non toxic ammunition. This has been the case since 1991 and will probably never change, rightfully so. The lead ammunition gets ingested by waterfowl and other wildlife like Eagles and kills en masse. I would suggest steel shot in sizes #2-4 for ducks and #2 and larger like B or BB for Geese. 3” shells will be plenty as long as your gun will handle them. Almost every new or semi new shotgun will. There are also more recent to the market non toxic loads made from Bismuth or Tungsten alloys. These are closer to the mass of lead and will certainly deliver more kinetic energy and penetration. These shells cost more per individual shell, but maybe cost beneficial when having to shoot birds multiple times with steel comes into play. If I can make a suggestion here it would be to grab a few boxes of target loads and some clay pigeons, or better yet go to skeet or sporting clays course and break that gun in, along with yourself. Get to know your gun and what chokes are good for what ranges. This will change with steel shot but in general more practice is better.Waders– Waders are important. You can shoot ducks without them but you’re really limiting yourself. A person with a pair of waders, shotgun and ammo can feasibly hunt ducks in a lot of places and situations and not need anything more than those things. Waders are what gets you in the game, duck hunting is all just a level of how wet you are and waders keep half of you dry. The half that would definitely be wet in most hunting circumstances. You will wear them hunting, putting out decoys and picking up birds. I like boot foot, breathable waders if budget allows, but for most a good pair of neoprene waders fit the ticket. Boot foot keeps your boots attached when stuck in deep mud. Plus, boot foot is generally less expensive than stocking foot waders with the added expense of a wading boot. I would get a good set of brown or camo waders. When in doubt brown is a good color to go with in the world of duck hunting. It just blends everywhere. Decoys- We can pass shoot or jump shoot ducks and skip decoys all together, but that’s not what you had in mind when you pictured yourself duck hunting. You picture your camo covered face looking up at ducks cupping up coming into land in a well placed decoy spread. Decoys are arguably more effective as a duck magnet than calling, and fake friends can bring birds that were passing by closer into your effective shotgun range. I would start with a dozen mallard decoys. You will need decoy line, weights and a bag to carry them in. The line and weights attach to the decoys to keep them from floating away and the bag is there for transporting and organization sake. Decoys can range from a few bucks all the way into the hundreds. The more realistic the decoys the better off you will be, but there have been a lot of birds killed over “economy” decoys and this is where I would start. A spinning wing decoy is another great addition but not a necessity. There are wind operated models and mini models that cost a little less than the professional grade decoys. Either of which would be a fine addition to the spread, but aren’t absolutely needed. Clothing- A good waterproof and windproof jacket is a start. Camo is great but a simple brown will work as well. All hunting is a game of layering. When you have a camo or brown outer layer you can layer whatever color you need under it for temperature regulation. This means that red fleece you love to wear can go under your camo jacket for extra warmth, just make sure the red isn’t showing. I would say a hood isn’t necessary but is a good option too. I like a camo or drab baseball hat when I can get away with it. The Brim is nice since I will be looking up most of the time. When temps dip I leave the hat on and put a winter hat over it. Two sets of gloves. I like a good set of wool gloves for most of my hunting. Wool insulates when wet. The other pair are elbow high decoy gloves. These are worn when setting and picking up decoys. They can also be a lifesaver when it’s truly cold and you forgot to bring any other gloves. A facemask is optional if you choose not to wear face paint. But one way or another camo your face. Your face is one of the most unnatural sights a bird can see coming into a decoy spread. Plus human skin shines, so keep that to a minimum. Calls- If I were to choose one call to hand a first time duck hunter it would be a drake whistle. These are often a horn shaped whistle that can imitate a Mallard Drake, Widgeon, Green Wing Teal and Pintail. They are easy to learn, and don’t freeze up. Understatement in calling is often better than over calling. And drake whistles fit the new hunter, understated, if it ain’t broken don’t fix it mold. They are also generally not expensive. From there I would go with a double reed duck call. They tend to be easier to learn with and have a bit of rasp to them that sounds good to you and the ducks. I generally blow a single reed call, they have a wider range of volume and tones available. They are a bit tougher to learn on, but once you get them you can blow any duck call well. There is a very valid argument to learn a single reed call first, because you will be a better double reed caller once you do. In any case, please watch videos and listen to professional callers and live ducks to learn how to call. Practice at home, in the car, but never while hunting. Until you have calling down, and you sound like a reasonable version of a hen mallard, don’t take your call to the woods and water. Stick with that drake whistle and you’ll be surprised how many ducks you can call in. Blind Bag- You will need a blind bag of some sort to keep your gear organized and have a centralized location for your stuff. There are backpack style blind bags and duffel bag style. I prefer a duffel style most times although each has their place. If I were hunting standing timber, pass shooting or jump shooting I would always use a backpack style. I like the duffel style because much like a pack mule load distribution matters when walking into spots. I can sling a gun on one shoulder, blind bag on the other, and a decoy bag over both. I couldn’t do that with a backpack style. What goes in the bag? We have a list of things for your blind bag listed here. Licenses, Stamps, Tags- As far as I can tell most content outlets virtue signal and say this first, but I think my readers are smart enough to understand that these things are first and foremost. Plus, each state has different requirements so check your local regulations and verify that just like after using the can, your paperwork is in order. If possible try to keep your Federal Duck Stamp every year. They have a culture all their own. That’s it, with these eightish things you’re on your way to duck hunting. I would suggest taking a peek at my mindset into detailed duck hunting. There are other things that you will certainly need, like a headlamp, reasonable binoculars, water and snacks but again I believe that you are smart enough to piece that together. Take your time to learn your different duck identifications, this is super important as bag limits are different between different sub species. Black Ducks and Mallard Hens can look a lot alike for instance, and too many in your possession of either one is illegal. Also watch some videos on duck behavior or go see it live and in person in your hunting area. The more you watch waterfowl and take in what’s happening and what they sound like the less your gear will matter. At the end of the day, you will buy some things you don’t need but maybe you want. You will dive into jerk rigs, and confidence decoys, acrylic calls, different duck species for decoys, swamp stools, the list goes on. I say this in full confidence, because if done right there are few styles and types of hunting that are as fun and as rewarding as waterfowl hunting. I am a solo hunter most of the time, but waterfowling is always best with friends and family. I would make a concerted effort to align with some local friends to hunt with, or even someone far away if you’re willing to take that adventure on. Will I hunt ducks by myself, yes. Do I prefer it, no. So in my opinion the very best investments you can make into your waterfowling career are first in yourself, to learn as much as you can, and second into a hunting partner because ducks or not, my hunting partners have become lifelong that rank among my closest family and friends.
June 3, 2022 What Shells are Best for Waterfowl Hunting Pt 2 A cannonball in the shallow end of shotshell selection By: TJ Rademacher In my last article I talked about the evolution of the modern waterfowl shot shell and how we have gotten back to offerings available that closely match the performance of lead. Hell, in some ways they might be better. So, you’ve got a whole lot of choices! Honestly, you can do well with any of the modern offerings. The knowledge I’m about to leave with you will help you understand what sizes of shot in a given material for some general situations. Some of this might surprise you. Since we are talking about shot let’s talk about chokes for a minute before we get too deep into this. Chokes obviously effect your pattern size and density (pellet count) through tighter or looser constrictions. You can go as far down the rabbit hole as you want on how company A guarantees 50% denser patterns and company B says birds will actually put themselves on your strap because if the decreased shot string length produced by their wad grabber technology. I don’t care what kind of snake its named after or what type of violent weather pattern its supposed emulate. Your choke and shotgun combo will literally be not worth a damn if you don’t pattern it with whatever load you choose to run through it. One more thing to consider for those who can’t or choose not spend money on some of the more expensive choke options your shotgun probably came with a few factory chokes. Just because its stock doesn’t mean it doesn’t work. Try them out with some of the partial boxes of shells you have. Get some cardboard out draw a 40-inch circle on it and shoot it. The results may surprise you. Let me preface this next part with the following, it’s an educated opinion. I’m not a ballistician and my physics formula game is weak so if you don’t completely agree with everything I have to say I’m sorry for any imperfections. There are tons of studies about the actual science of why a certain shot size does what it does as it travels down range or when it makes contact with a bird. I highly suggest you read some of the stuff by Tom Roster if you want a real understanding of the science. If you like the details like me, you will find this information extremely interesting. This is not that kind of article though. I’m going off the research that I was able to digest from folks like Tom over the years and the experiences I have had in the field. Here are the cliff notes. Ditch the 3.5 inch shells. You don’t need them. The tradeoff for more powder and heavier pay loads is more recoil. Recoil affects your ability to be able to get back on target after you either miss or you are trying to get after that other drake you see slipping out the back. Even if you are pass shooting I hold the same opinion. If you are shooting a steel shot shell, I recommend a 3inch shell. You can get more than enough speed to kill birds as long as you are choosing the right size shot and plenty enough payload for dense patterns. If you choose to go with Bismuth or tungsten I maintain that you really don’t need anything more than a 2 ¾ inch shell for birds inside of 40ish yards. This is because we are back to the near lead performance level with bismuth and way beyond with tungsten. I’ve also found that tungsten, bismuth and steel pattern out of 2 3/4 and 3 inch shell more uniformly and denser than 3.5-inch shells in my results. This is just my experience, but hey it jives with the science too. It’s weird how that stuff works. On to shot size. I don’t really see why you would need to shoot more than BB in a quality steel load for any North American waterfowl. To be completely honest I think #2 shot is plenty if your pattern is doing what is supposed to and you are being ethical with your distances. Here is why the shot is roughly a sphere. It’s not super aerodynamic like a bullet so the larger the sphere the more drag it creates. its gong to slow down faster than a slightly smaller shot and also when it hits the bird it probably going to drag more crap with it through the wound channel. So at the effective ranges shotgun operate in the #2 shot will most likely be traveling faster longer and penetrate deeper. This is why I would go with #2 for big ducks and Geese. For smaller ducks I go with #4 and #6 shot sizes. If its early season teal, go with the extra pellets #6 offers. If you feel like you need some more thump for those wood ducks, widgeon and even a pintail if he’s close go #4. This is what I consider optimal If you choose steel. If you go with the bismuth and tungsten blends you can drop a couple shot sizes and expect The same performance you had with your steel loads. You are going to pick up some density in your patterns with the same sort of ballistic results in a larger steel load. This is where I have found is the happy medium for me. I’m getting lead-ish performance for a little bit more. Plus, I get fewer holes in my pattern. These make the most sense to me if you can make room for it in the budget. Also consider this, if the amount of shooting you do is low volume and opportunities are hard to come by it may be advantageous to use a higher density shell. You will not be burning through them as fast. I’ve adopted this approach because in my home state of North Carolina I can count on one hand the times I’ve ever gotten close to going through a box of shells in a single hunt. Food for thought. If you can justify them and want to shoot a pure tungsten load more power to you. I’ve shot a handful of boxes at birds and patterned them and they are truly devastating on and off paper. I know for a fact that #9 and #8 will crush mallards at all ethical ranges. I’ve not seen it but have heard of people putting geese down with #7 1/2. The patterns are dense enough that you do not have to worry about a bird slipping through. There is just not enough room. If you put a good shot on them with tungsten odds are the bird is going down hard. However, the price is asinine. We are talking around 70-90 bucks for a box of 10. It’s hard to wrap your brain around that kind of price tag for waterfowl hunting. If the cost was no object I would shoot these. For now, I’ll stay in my budget’s lane. I encourage everyone to use their best judgment on what shells to pick. Don’t get too hung up on the material because you can have success with all off the flavors of shot shell on the market. What you should get hung up on is how a given load performs out of your particular shotgun. Don’t get caught up in the opinions of others either before you try something. Don’t let anyone price shame you or tell you it’s not good enough. If it patterns well you will be just fine. Remember you have to find them before you can shoot them. I recommend money be spent on fuel and a decent set of binoculars before I got carried away with ammunition. Drink water… there is nothing worse than pulling your foot out of wader boots with a calf cramp. T
May 27, 2022 The Evolution of Shot Shell Performance Part 1 Choosing The Best Waterfowl Load Through Observation By: TJ Rademacher Lead shot has been gone for a long enough to become the stuff of legend. I’ve heard stories of its abilities on ducks and geese. Before the 1991 ban on lead shot shells for waterfowl hunters never really had to deal with a lack knockdown power. There have been thousands and thousands of birds killed with a very limited selection of lead shot shell lengths and payloads. Since lead became off limits to us, we’ve been chasing its characteristics in other materials. This is a look at how we’ve really come full circle to match, and in some instances greater ballistic performance of the venerable lead pellet. The best waterfowl load is matching or exceeding the performance of lead. I’ve heard the guys who used lead before the ban talk about a how 2 ¾ inch #6 loads where absolute poison on decoying big ducks. 3 inch #4 was the surefire solution to putting geese on the ground. Bluebills being crushed by #7 trap loads over a big water layout boat rig was commonplace. Lead is a very effective transferor of energy. It is very dense as compared to the surface area. This density allows for penetration through vital organs and kinetic energy transfer that can break key structural junctions that keep birds in the air. Lead loads were propelled around 11-1200 FPS in traditional loads used for the take of waterfowl and still are for applications where they are still allowed to be used. Once this wasn’t allowed and shot shell manufactures looked for an answer with nontoxic properties, steel was picked up as the substitute. Early steel shot users had horrible reviews. Hunters with claims of shot bouncing off birds not penetrating the fat layer on late season birds. Early steel loads were of low quality in some cases. The modern ways that manufactures have squeezed the maximum amount of performance out of steel loads was not present then. It was a time of adjustment and as with anything totally new there was a lot to figure out. To get the same kinetic energy the size of shot had to go up to consistently kill birds. As shot size goes up in relation to a constant payload weight the number of pellets in that load goes down. You’re getting a less dense pattern. So, if you look at the voids that this can create in the pattern, you can see how a bird could pass through untouched. Worse yet the same bird might not absorb enough pellets to make a quick kill. Extra powder longer shells like the 3.5” chambering in 12 gauge were ways to make payloads increase and to make up for the other thing that helps steel ballistics wise. Speed. The speed of the pellets increased to help make up for steels deficiencies. Advertised speeds up to 1700 fps have come to market to cure steels shortcomings. There are many other factors in the evolution of steel shot that increased its performance for a budget friendly alternative to lead, but we don’t have room for all of the finer points we are hitting the high points here. As the market evolved some companies brought to market new materials to move the standard seen in steels shells. Steel has killed a lot of birds from its inception until now. Enter bismuth and tungsten. These elements are what have brought us back around full circle. They get us close to some of the properties of lead and in some case surpass its performance. These two metals are good substitutes because they have the density like or greater than lead based on what blend of either. They are also nontoxic, which is a continued push in modern ammunition. The only real problem with loads utilizing these two types of material is cost. Even with blending these with duplex steel loads like Hevi Metal the price of a box of shells is noticeably higher, no matter what flavor combination you choose. You are also getting fewer shells in some loads based on what blend of either type of material is being used. Tungsten and bismuth are typically blended with other metals or polymers make them more affordable and increase performance on some areas. There are a few offerings in a pure tungsten load which allow for shot as low as #9 with ballistic capabilities comparable to that of larger lead and steel pellets. These are very cost prohibitive and are not a normal selection for even the most dedicated shell snobs. I have used some of the lower density blends and had really good results. In my opinion the reasons why the bismuth blends are worth the increase in cost is the increased pattern density. The fewer number of holes in the pattern, from a properly choked gun, is noticeable in downrange performance on birds, in my experience. There are other nuances to this material, but these are the high-level differences and advantages that I feel most hunters would see as pertinent information. The next part of this series will have more to with what sizes of shot to choose given a particular material and more about the ballistics of different lengths of shells and weight of payloads and why you might choose one or the other for different situation or when choosing one load to do it all with. I felt it was necessary to understand the history as I’ve observed it before we go into the why. I’ll leave you with this. Most of us need to spend more time shooting clays. Many times, the reason the bird doesn’t drop is because you didn’t put the work in during the off season. You may also make a choice to take an opportunity on something that is low percentage at longer range. This is not the end all be all or a reason to buy the cheapest stuff out there but the advantages in one material over another shine when the shooter is performing at their highest level. To put a modern spin on an old saying it’s probably the indigenous individual not the archery equipment. More to come soon. Don’t Stop your swing T
